AT4 Street includes the helmet plus the key accessories supplied as standard.

AT4 Street includes the following items in the box as standard:- AT4 Street helmet- Clear visorIncluded items can vary if a product listing says otherwise, so always check the product page before you buy.Need more help? Contact our Customer Experience team <a href="https://support.ruroc.com/en-US/contact">here</a>.

AT4 Street - What’s Included in the Box

AT4 Street is certified for road use and carries ECE 22.06 and DOT certification.

AT4 Street is built for road use according to the certifications listed below. You should still check local laws and any venue rules that apply where you ride.Certifications- ECE 22.06- DOT (FMVSS 218)Road and track useAT4 Street is a road-use helmet. It is not approved for track use. If you need a Ruroc helmet for track riding, AT4 Track is the model in the range designed and certified for that purpose.Things to know- Certification requirements can vary by country, so riders should always check local laws before use.Need more help? Contact our Customer Experience team <a href="https://support.ruroc.com/en-US/contact">here</a>.

AT4 Street - Certifications and Road Use

AT4 Street does not include a Pinlock insert in the box, but compatible AT4 Pinlock options are available.

AT4 Street does not come with a Pinlock insert in the box.Compatible Pinlock options- AT4 Pinlock 70- AT4 Pinlock 120 XLT- AT4 Pinlock 70 ProtecTINTThings to know- Pinlock 70 ProtecTINT is intended for track use only when fully dark because of its light-transmission level.- Higher Pinlock numbers indicate a higher level of anti-fog performance.Fitting tips- Make sure the visor is clean on the inside before fitting the insert.- Always place the visor on a soft surface before you start.- Handle the insert carefully to avoid scratching the inner face of the visor.- Once fitted, check that the insert sits evenly against the visor seal.If you prefer, you can follow the public fitting guide&#xA0;<a href="https://www.youtube.com/watch?v=1Of5ll0DYw0&amp;t=2s">here</a>.Need more help? Contact our Customer Experience team&#xA0;<a href="https://support.ruroc.com/en-US/contact">here</a>.

AT4 Street - Pinlock Compatibility and Fitting

AT4 Street is compatible with AT4 Shockwave and is designed to accommodate an integrated communications unit.

AT4 Street is designed to work with an integrated Ruroc Shockwave unit rather than an external bolt-on system.Compatibility- AT4 Street is compatible with AT4 Shockwave.- AT4 Shockwave is the Ruroc integrated unit designed for the AT4 range.Third-party comms- Third-party comms can sometimes be used, but Ruroc does not recommend them because external units can add bulk and may increase snag risk.Need more help? Contact our Customer Experience team <a href="https://support.ruroc.com/en-US/contact">here</a>.

AT4 Street - Shockwave Compatibility

Regular gentle cleaning and dry storage will help keep AT4 Street in the best possible condition.

To keep AT4 Street in the best condition, clean it gently and store it somewhere cool, dry and protected when it is not in use.Cleaning- Use a soft microfibre cloth or lint-free cloth for the visor and outer surfaces.- Use lukewarm water where needed and avoid abrasive cleaners or harsh chemicals.- If you remove the visor or liner for cleaning, make sure all parts are completely dry before refitting them.- Take extra care with the inside of the visor, as scratches can affect Pinlock performance.Storage- Store the helmet in a cool, dry place away from direct heat and prolonged sunlight.- Do not store it while damp.- Keep it away from chemicals, fuels and other substances that could damage materials or finishes.Important- Do not use aggressive cleaning products on the visor, shell or liner.- If you are removing or refitting accessories after cleaning, make sure all fixings are secure before you ride.Need more help? Contact our Customer Experience team <a href="https://support.ruroc.com/en-US/contact">here</a>.

AT4 Street - Cleaning, Care and Storage

Selected AT4 Street spare parts and comfort fitment parts are available, subject to stock and region.

Selected spare parts and comfort fitment parts are available for AT4 Street, subject to stock and availability.Common spare parts- Standard cheek pads- Standard headliner- Chin curtain- Shockwave cover- Headliner poppers- Visor kit / visor hardwareImportant- Availability can vary by region and stock position.- Some parts may be supplied through customer support rather than listed as a standard website item.- If you are unsure which part you need, contact support before ordering.Need more help? Contact our Customer Experience team&#xA0;<a href="https://support.ruroc.com/en-US/contact">here</a>.

AT4 Street - Spare and Replacement Parts

Email Us 

Monday - Friday 08:00 AM - 10:00 PM
Saturday - Sunday 09:00 AM - 05:00 AM